Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.
Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.
Blog Article
Do not ignore the forklift at work. If the operation is bad, there will be serious accidents in minutes, and there are many mishaps including forklifts.
Instance 1: The forklift cargo blocked the driver's view, and the individual in front could not be located, leading to a moving crash.
Instance 2: In order to preserve the balance of the forklift when raising heavy goods, the workers used their body weight as the counterweight, which almost created casualties.
Case 3: The width of the forklift freight surpasses the allowed size of the route and holds on the roadside shelf, which practically triggers an mishap.
Situation 4: Forklift is speeding and rolls over during a turn.
Case 5: The forklift driver did not discover the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift lifts the personnel illegally, the forklift driver does not wear the seat belt, the forklift lifter falls and the vehicle driver is crushed when the forklift rolls over.
Instance 7: The forklift chauffeur did not put on a seat belt and fell from the vehicle when it surrendered and was crushed.
Forklift procedure must take notice of these issues ：.
Start.
1. Prior to beginning, observe the environments, and after validating that there are no obstacles that impede the safety and security of driving, beep the horn initially and afterwards begin.
2. For vehicles with hydraulic (air pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge must be safe prior to starting.
3. When the forklift begins with a tons, the chauffeur must first verify that the load is steady and trusted.
4. The begin must be slow and steady.
Driving.
1. When driving, the height between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the pole should be tilted backwards. .
2. Do not lift the fork expensive when driving. When getting in and leaving the task site or while driving, be careful that there will be no challenges in the sky. When the load is traveling, the fork should not be increased expensive, which will affect the stability of the forklift. .
3. After unloading, the fork should be reduced to the regular driving setting before driving. .
4. When transforming, if there are pedestrians or automobiles nearby, the driving signal must be issued first. High-speed doglegs are prohibited. High-speed sharp turns will cause the car to lose side security and tip over. .
5. When the forklift is downhill, it is purely restricted to switch off the flame and slide, and it is prohibited to brake unexpectedly while driving with loads unless there are unique scenarios.
6. When the forklift is running, it should comply with the web traffic rules in the manufacturing facility and need to keep a particular security range from the lorry ahead. .
7. When the forklift is running, the load needs to be in the lowest placement that does not hinder the driving, and the gantry ought to be appropriately tilted back. The load shall not be increased except when piling or loading. .
8. The height of the load have to not block the chauffeur's view. In special conditions, when the thing impacts the forward vision, drive at a reduced speed when turning around.
9. It is prohibited to turn on the ramp, nor to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility area is 5 km/h, and it should drive safely at a low speed when entering the production workshop location. .
11. When the forklift is lifted, lifted or driven, it is restricted for workers to base on the fork to hold items and play a stabilizing role. .
12. If problems are found, they will be fixed and reported in a timely manner, and they will certainly never run with ailments or hide them.
filling and dumping.
1. When fork-loading products, the distance in between the two forks must be readjusted as needed to make the lots of both forks balanced and not skewed, and one side of the thing must protest the shelf. .
2. It is prohibited to collaborate with a single fork or use a fork top or draw. In unique situations, security warning signs need to be established to advise surrounding pedestrians. .
3. In the process of packing and dumping items, the forklift should be stopped with the brake. .
4. The rate of the automobile need to be sluggish and stable. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled items and hurt individuals. .
5. When utilizing a fork to fork the goods, the fork should be as deep as feasible under the load, and it ought to be kept in mind that the fork idea need to not touch various other goods or things. The tons needs to be supported with marginal back tilt of the gantry to ensure that the lots does not slide in reverse. The pole can be tilted forward a little when the lots is decreased to allow for simple positioning of the lots and extraction of the forks. .
6. It is prohibited to fork items at broadband and collide with difficult items with the fork head. .
7. When the forklift is functioning, it is forbidden for people to stand around the fork, so regarding stay clear of the collapse of the goods and injure people. .
8. Overloading is forbidden, and it is banned to use forks to lift workers to participate in high-altitude procedures to stay clear of high-altitude dropping accidents. .
9. It is not allowed to use the brake inertia to slip, put, round or roll objects. .
10. It is not allowed to use forks to choose, turn pallet discharge.
Leaving .
1. It is prohibited to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you need to dump the goods or reduced the fork structure.
2. Pull the emergency brake take care of to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for unique scenarios, such as the motorist does not leave the automobile's view and does not surpass 1 min).
4. Get rid of the secret. .
Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance needs to be checked, and gas, lubing oil and air conditioning water must be added.
2. Check the safety Electric Forklift Truck for Warehouse efficiency of beginning, running and braking.
3. Check whether the lights and horn signals are complete and reliable.
4. Throughout the operation of the forklift, check whether the stress and temperature level are typical.
5. After the forklift is running, the external leak must likewise be checked and the seals should be changed in time.
Forklift Safety Operation Specifications.
1. You need to check prior to leaving the auto;.
2. When you run into somebody in front of you throughout driving, you ought to send a signal at a distance of 5 m;.
3. The driving rate in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the cargo must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming ought to not be too sharp to stop the tendency of " cost-free Stand-on Electric Pallet Stacker turning";.
6. Adding and down the slope should be sluggish and uniform, and no activating the slope is permitted.
7. Do not drive across the slope. When the gradient is more than 10%, the car should be driven backwards when worsening;.
8. When the forklift workers lug the goods and progress, if they run into big or hefty goods and most likely to the vehicle driver's view, they ought to take the turning around exercise
.
The "Eight Prohibitions" must be followed in the operation.
1. Solitary fork operation is not permitted.
2. It is not allowed to lift the goods for cross country driving.
3. It is not allowed to get the goods by passing on the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not allowed to utilize stopping pressure to exile round or easy-to-roll items.
7. It is not enabled to bring individuals to work on the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is elevated.
8. Do not drive side to side on slopes
.
Vehicle parking is not allowed under the list below problems.
1. Curves, narrow roads, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the section with the same length as the obstacle ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844